Brand: Support OEM
Packaging: 1.Strong plywood pallet 2.Strapped with PET rope 3.Protect corner & edges 4.PE film covered on the 6 surfaces
Productivity: 150,000pcs per month
Transportation: Ocean,Land
Place of Origin: China
Supply Ability: 150,000pcs per month
HS Code: 6811899 681182
Port: Qingdao,Tianjin,Shanghai
Payment Type: L/C,T/T
Incoterm: FOB,CFR,CIF,EXW
Delivery Time: 21 Days
Length | 2440mm | ||||
Width | 1220mm | ||||
Thickness | 3mm,6mm,8mm,12mm,15mm,18mm | ||||
Density | 1.0-1.4G/CM³ | Impermeability | No water droplets,no condensation | Bending Strength | 29MPA |
Moisture Content | ≤10% | ≤5% | Moisture Deflection | 0.2MM | |
Dry Shrinkage
| ≤0.3% | Surface Resistant to Dry Heat | No cracks, no blisters | Combustion Performance | Class A |
Moisture Movement | ≤0.6% | Surface Crack Resistance | 0 level | Fire-resistant Limit | >2Hrs |
Screw Holding Force | ≥15N/MM | Veneer Bonding Strength | 1.1MPA | Air Insulation of Sound | >42DB |
Impact Strength | >6.0KJ/M² | Thermal Conductivity | 0.109 temperature equalization 30±5℃ | Flexural Strength After Drying | 15MPA |
100% environmental protection: | No radioactive materials, no formaldehyde, no asbestos, no benzene. | ||||
Water Permeability | No significant wetting or water droplets on the back |
Brief Introduction
Waterproof Decorative Melamine Laminated MGO Boards is used Magnesium Oxide Board as substrate material, and compounded with gluing melamine paper to MgO Board.It combines the advantages of Mgo Board and melamine paper, and is an innovative decorative wall material.
High quality melamine laminated mgo board decorative insulation mgo board is widely used for interior decoration and furniture making.
Properties
1. Good visual effect, the panel can be made into different designs with vivid gloss.
2. Tough, abrasion-resistant, heat-resistant
3. Acid-resistant, alkali-resistant, oil-resistant
4. With smooth surface, easy to clean
5. Fireproof: Grade A non-combustible
6.Waterproof
7. Healthy and environmental friendly, doesn't contain asbestos, formaldehyde or benzene
Production process: no industrial "three wastes", no toxic substance discharge.
Finished products: fire resistance, high temperature resistance, no release of toxic substances, fully environmentally friendly products, superior performance.
FILLING
The joints between the boards must be filled with the outdoor filler, MGO Filler Dry, which should also be used to finish the surface. Apply one 2-3 mm coating of filler interposing the alkali-resistant reinforcement tape; allow filler to dry then smooth off and finish.
FINISHING
Finish the surface with the same product MGO Filler Dry used to fill the joints, laying a coat of about 3 mm; bury the alkali-resistant glass fibre mat into the finishing coat, overlapping the edges by at least 10 cm. Wait for 24 hours, then apply the second finishing coat if necessary. Before applying any other finishing material, allow the finishing filler to dry and harden for at least 24 hours.
INSTALLING THE FINISHING PROFILES
Fix the PVC finishing profiles (edge beams, drips, expansion joint covers, cornices etc.) burying them into the mat on the finishing deck and overlapping the same over the edges of the alkali-resistant glass fibre mat. In particular cases, the profiles may be fixed to the metal sub-structure with the same screws used to fix the boards, or may be fixed to the boards with metal clips.
INSTALLING THE EXPANSION JOINTS
Expansion joints should be installed at every 6 m; joints should also be installed in the following cases:
- at the expansion joints of the building.
- at the floor division of the building.
- at points of variations of the materials of the structure or facing of the building.
The metal support framework should in any case be interrupted at the expansion joints.
1.Strong plywood pallet 2.Strapped with PET rope
3.Protect corner & edges 4.PE film covered on the 6 surfaces
Whatsapp/wechat: +86 18264133237(Amy Zhang) +86 18754133238(Linjing Zhao)
Email: amy AT sdlceat.com
Product Categories : MgO Decorative Board > 3mm Decorative Board